Best Home Theater System

To start off, there really is no universal guide to set up a home theater system. This guide will cover the basics that all systems will have, yet each system will be different. The physical make-up of a home theater system depends completely on the type of brand, what size system is to be installed and number or equipment parts and components that will be used in the process. There is also the critical element of making sure the amperage, wattage and wire gauges are all the in the optimal ranges for the equipment it to be used properly.

Ideally, an installation should be left to the professionals. Not understanding instructions completely and accurately can lead to blown speakers, injures or even worse! Faulty wiring could even start a fire and destroy your entire home! If you have any doubts or questions, a trusted professional company like Branham Sound Systems can help you set up a home theater system the right way with no worries or hassle. Have a look at enhance your home theater for more info on this.

Okay, that’s enough of adisclaimer. For the experienced do-it-yourselfer, the setup process could be relatively easy. That is, of course, again dependent of the system. Aping up an entire home with an audio and video distribution system might be a totally different story. However, for the basic install, it shouldn’t be too hard nor time-consuming. Now it’s time to see how you can get subwooferpounding and your chairs shaking in these 3 simple steps.

Step 1: Getting the Equipment

If you don’t already have your equipment, you are likely contemplating on what to buy and how much of it. At the minimum, you will need an HDTV, a good receiver and as many speakers as you’d like, so long as the receiver has enough channels to support them. A good start would be at least five speakers to create an immersive environment and definitely a subwoofer to bring out the bass.

Make sure when purchasing a receiver that the amperage is suitable for the speakers you want to pair with it. Too high or too low could blow out the speakers, making for a pretty sad day. It also should be a pretty decent quality brand, such as Klipsch or something similar. Skimping on the receiver could end up costing in the long run. Always make sure that the receiver is from a reputable manufacturer and will be able to live up to its demands. After all, it is the control center that will be running the entire system.

Step 2: Spacing

A home theater system is all about spacing. You want the speakers to be at equal distances from the viewing area on all sides; 2 in the rear, 2 in the front and 1 center speaker positioned between the two front speakers. This ensures you get an accurate sound that matches the picture. The subwoofer can essentially be placed anywhere, but it is best left close to the center speaker.

The spacing is especially important for creating a lifelike experience. As the action shifts from one side of the screen to the other, the audio will seamlessly follow. The viewer will be tempted to follow with their eyes as if it is really happening in front of them!

Step 3: Wiring

High-powered systems may require thicker gauges of wiring in order to properly conduct enough electricity. Be sure to refer to the owner’s manual or ask an audio professional if you’re not sure.

The receiver should have at least 5 red and black (or gray) ports to connect your speaker wires. The speakers should each also have a similar setup on them. If the wires are brand new, they may need to be cut to expose the copper wire inside. You can do this with a simple pair of wire cutters.

Once cut, match each speaker position to the label on the receiver. For example, the wires for the front left speaker would go in channel “FL” or however the receiver may label it. Make sure the wires make enough contact and are tightly secured. Now you should be all set and ready to test it out!